Home > Electric Vehicle Testing Equipment >

Water Booth Rain And Dry Test System For Outdoor Motor Vehicles

Product Categories

Electric Vehicle Testing Equipment [31]
EVSE Testing Equipment [26]
EV Connector Testing Equipment [87]
EV Battery Testing Equipment [49]
Walk In Environmental Test Chamber [31]
Environmental Test Chamber [52]
Temperature Humidity Test Chamber [26]
Water Ingress Testing Equipment [41]
Flammability Testing Equipment [20]
Electrical Safety Testing Equipment [25]

Sinuo Testing Equipment Co. , Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Water Booth Rain And Dry Test System For Outdoor Motor Vehicles

Name: Water Booth Rain And Dry Test System For Outdoor Motor Vehicles
Brand: Sinuo
Price: 1 USD

Wholesale Water Booth Rain And Dry Test System For Outdoor Motor Vehicles from china suppliers

Brand Name : Sinuo

Model Number : SNQC1001

Certification : Calibration Certificate (Cost Additional)

Place of Origin : China

MOQ : 1

Payment Terms : T/T

Supply Ability : 10 Sets Per Month

Delivery Time : 30 Days

Packaging Details : Export packing

Rain direction : 0-90°

Rain intensity : (12±1) mm/min

Nozzle pressure : 150kPa±10kPa

Rain time : 1～600 minutes

Rain test chamber inner frame dimensions : 7.4×3.4×3.1m (L*W*H)

Rain test chamber outer frame dimensions : 7.6×3.8×4.5m (L*W*H)

Preset rain time : 1～9999H59M59S

Maximum vehicle size : 2*1.5*1.6mm～6*2*2.1m (L*W*H)

Contact Now

Water Booth Rain and Dry Test System for Outdoor Motor Vehicles

Complied Standards & Clauses

Conforms to QC/T476-2007 "Rainproof Sealing Limits and Test Methods for Passenger Vehicles" QC/T911-2013 Electric Energy Vehicles.

Product Overview

The purpose of this test room is mainly to test the ability of the tested product to prevent rainwater penetration under rain conditions and its rainproof performance during or after being rained. This test equipment is mainly used to assess whether the housing/seals of electrical and electronic products can ensure the good working performance and technical status of the equipment and components after or during the water test. At the same time, the product may be affected by water during transportation or use, providing a reference basis for product technical standards.

Technical Parameters

Rain intensity	The front of the vehicle body (12±1) mm/min; the side, rear and top of the vehicle body (8±1) mm/min
Nozzle spray pressure	The commonly used water spray pressure is 50kpa, which is equal to 3mm/m³ rainfall, 100kpa, which is equal to 6mm/m³ rainfall, and 150kpa, which is equal to 8mm/m³ rainfall. The specific rainfall is subject to actual commissioning
Nozzle pressure	150kPa±10kPa
Rain direction	0-90° (adjustable)
Rain time	1～600 minutes or more can be set
Preset rain time	1～9999H59M59S can be set
Pressure gauge	Install a pressure gauge at the outlet of the branch pipe of the water pump, and use a valve to adjust the pressure
Flow meter	Install a flow meter at the outlet of the branch pipe from the water pump
Maximum vehicle size	～622.1m (length×width×height)
Rain test chamber inner frame dimensions	Approximately 7.4×3.4×3.1m (length×width×height)
Rain test chamber outer frame dimensions	Approximately 7.6×3.8×4.5m (length×width×height)

1. The rainproof sealing test device of the car should ensure that the five surfaces of the car are sprayed from the top, left, right, front and rear directions to avoid dead corners of water spraying, and ensure that the water spraying pressure and flow rate correspond to the standard requirements of various parts of the vehicle. The frame structure of the rain chamber is simple and beautiful while ensuring rust prevention and shock prevention. The entire equipment is easy to operate and convenient for the inspection and maintenance of parts.

2. The whole can accommodate the inspection of sample vehicle of different sizes at the same time. A spraying system is designed for different sizes of equipment. Each spraying system is equipped with a pressure gauge and a regulating valve to adjust the pressure to ensure uniform water spraying. The entire spraying line is 7.4 meters long. The full-spraying type is adopted. It adopts a profiling full spray type. The nozzles spray water on the vehicle body from five directions: both sides, front and rear, and top, avoiding dead corners of water spray and ensuring that the water spray pressure and flow intensity correspond to each part of the vehicle and meet the national standard requirements.

3. The structure of the chamber body is designed to be rust-proof, shock-proof, and simple and beautiful at the same time. There are drainage channels at the bottom of the side of the chamber body to ensure no water seepage.

Details

Product Tags:

Water Booth Rain And Dry Test System For Outdoor Motor Vehicles Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Water Booth Rain And Dry Test System For Outdoor Motor Vehicles

Water Booth Rain And Dry Test System For Outdoor Motor Vehicles

Outdoor Motor Vehicles Rain Test System

Outdoor Motor Vehicles Dry Test System

Dry Test System Rain Booth

Water Booth Rain And Dry Test System For Outdoor Motor Vehicles Images